Dedikuoti serveriai, VDS hostingas, debesų kompiuterija
Interneto vizija
Karjera El. paštas

Grįžti   Dedikuoti.lt forumas > Bendruomenės diskusijos > Pamokos > Monitoringas

 
 
Temos įrankiai Ieškoti šioje temoje
  #1  
Senas 2011-11-21, 17:16
IV_RomanL avataras
IV_RomanL IV_RomanL neprisijungęs
Interneto vizija
 
Prisiregistravo: 2011 11
Vieta: Vilnius
Žinutės: 640
Post Monit - servisų stebėjimo sistema

Monit - nemokama, atvirojo kodo programa skirta serverio servisų, programų, failų ir failinių sistemų stebėjimui. Monit automatiškai atlieka reikiamus veiksmus kritinėse serveriui situacijose.

Diegiame CentOS 6/7 64-bit operacinėje sistemoje.

===============
0. Aktyvuojame RPMforge repozitoriją:

CentOS 7:

Kodas:
wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
rpm -Uvh rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
CentOS 6:

Kodas:
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm

1. Įdiegiame Monit į serverį:

Kodas:
yum install monit
2. Redaguojame monitrc failą aplanke /etc/monit :

Kodas:
nano monitrc
Įklijuokite šias reikšmes:

Kodas:
###############################################################################
## Monit control file
###############################################################################
##
## Comments begin with a '#' and extend through the end of the line. Keywords
## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'.
##
## Below you will find examples of some frequently used statements. For 
## information about the control file, a complete list of statements and 
## options please have a look in the monit manual.
##
##
###############################################################################
## Global section
###############################################################################
##
## Start monit in the background (run as a daemon) and check services at 
## 2-minute intervals.
#

set daemon  60

#
#
## Set syslog logging with the 'daemon' facility. If the FACILITY option is
## omitted, monit will use 'user' facility by default. If you want to log to 
## a stand alone log file instead, specify the path to a log file
#

set logfile syslog facility log_daemon                       

#
#
## Set the list of mail servers for alert delivery. Multiple servers may be 
## specified using comma separator. By default monit uses port 25 - this
## is possible to override with the PORT option.
#
#set mailserver mail.bar.baz,               # primary mailserver
#                backup.bar.baz port 10025,  # backup mailserver on port #10025
#                localhost                   # fallback relay
#
#
## By default monit will drop alert events if no mail servers are available. 
## If you want to keep the alerts for a later delivery retry, you can use the 
## EVENTQUEUE statement. The base directory where undelivered alerts will be 
## stored is specified by the BASEDIR option. You can limit the maximal queue
## size using the SLOTS option (if omitted, the queue is limited by space 
## available in the back end filesystem).
#

  set eventqueue
  basedir /var/log/monit  # set the base directory where events will be  stored
#  slots 100           # optionaly limit the queue size

#
#
## Monit by default uses the following alert mail format:
##
## --8<--
## From: monit@$HOST                         # sender
## Subject: monit alert --  $EVENT $SERVICE  # subject
##
## $EVENT Service $SERVICE                   #
##                                           #
##     Date:        $DATE                   #
##     Action:      $ACTION                 #
##     Host:        $HOST                   # body
##     Description: $DESCRIPTION            #
##                                           #
## Your faithful employee,                   #
## monit                                     #
## --8<--
##
## You can override this message format or parts of it, such as subject
## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
## are expanded at runtime. For example, to override the sender:
#
# set mail-format { from: monit@foo.bar }
#
#
## You can set alert recipients here whom will receive alerts if/when a 
## service defined in this file has errors. Alerts may be restricted on 
## events by using a filter as in the second example below. 
#
 set alert vardas@domenas.lt                     # receive all alerts
 set alert vardas@domenas.lt only on { timeout }  # receive just service-
#                                                # timeout alert
#
#
## Monit has an embedded web server which can be used to view status of 
## services monitored, the current configuration, actual services parameters
## and manage services from a web interface.
#
      set httpd port 8090 and
#    use address localhost  # only accept connection from this IP
    allow Jūsų IP        # allow localhost to connect to the server and
    allow vardas:slaptažodis    # require user 'admin' with password 'monit'
#
#

###############################################################################
## Services
###############################################################################
##
## Check general system resources such as load average, cpu and memory
## usage. Each test specifies a resource, conditions and the action to be
## performed should a test fail.
#
#  check system myhost.mydomain.tld
#    if loadavg (1min) > 4 then alert
#    if loadavg (5min) > 2 then alert
#    if memory usage > 75% then alert
#    if cpu usage (user) > 70% then alert
#    if cpu usage (system) > 30% then alert
#    if cpu usage (wait) > 20% then alert
#
#    
## Check a file for existence, checksum, permissions, uid and gid. In addition
## to alert recipients in the global section, customized alert will be sent to 
## additional recipients by specifying a local alert handler. The service may 
## be grouped using the GROUP option.
#    
#  check file apache_bin with path /usr/local/apache/bin/httpd
#    if failed checksum and 
#       expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor
#    if failed permission 755 then unmonitor
#    if failed uid root then unmonitor
#    if failed gid root then unmonitor
#    alert security@foo.bar on {
#           checksum, permission, uid, gid, unmonitor
#        } with the mail-format { subject: Alarm! }
#    group server
#
#    
## Check that a process is running, in this case Apache, and that it respond
## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory,
## and number of children. If the process is not running, monit will restart 
## it by default. In case the service was restarted very often and the 
## problem remains, it is possible to disable monitoring using the TIMEOUT
## statement. This service depends on another service (apache_bin) which
## is defined above.

#ProFTPd ftp serveris

 check process proftpd with pidfile /var/run/proftpd.pid
   start program = "/etc/init.d/proftpd start"
   stop program  = "/etc/init.d/proftpd stop"
   if failed port 21 protocol ftp then restart
   if 5 restarts within 5 cycles then timeout

#SSHd servisas

check process sshd with pidfile /var/run/sshd.pid
   start program  "/etc/init.d/ssh start"
   stop program  "/etc/init.d/ssh stop"
   if failed port 22 protocol ssh then restart
   if 5 restarts within 5 cycles then timeout

# Postfix Mail serveris

check process postfix with pidfile /var/spool/postfix/pid/master.pid
   group mail
   start program = "/etc/init.d/postfix start"
   stop  program = "/etc/init.d/postfix stop"
   if failed port 25 protocol smtp then restart
   if 5 restarts within 5 cycles then timeout
   depends on postfix_rc

 check file postfix_rc with path /etc/init.d/postfix
   group mail
   if failed checksum then unmonitor
   if failed permission 755 then unmonitor
   if failed uid root then unmonitor
   if failed gid root then unmonitor

# MySQL serveris

check process mysql with pidfile /var/run/mysqld/mysqld.pid
   group database
   start program = "/etc/init.d/mysqld start"
   stop program = "/etc/init.d/mysqld stop"
   if failed host localhost port 3306 protocol mysql then restart
   if 5 restarts within 5 cycles then timeout
   depends on mysql_rc

 check file mysql_rc with path /etc/init.d/mysql
   group database
   if failed checksum then unmonitor
   if failed permission 755 then unmonitor
   if failed uid root then unmonitor
   if failed gid root then unmonitor


## Check device permissions, uid, gid, space and inode usage. Other services,
## such as databases, may depend on this resource and an automatically graceful
## stop may be cascaded to them before the filesystem will become full and data
## lost.
#
#  check device datafs with path /dev/sdb1
#    start program  = "/bin/mount /data"
#    stop program  = "/bin/umount /data"
#    if failed permission 660 then unmonitor
#    if failed uid root then unmonitor
#    if failed gid disk then unmonitor
#    if space usage > 80% for 5 times within 15 cycles then alert
#    if space usage > 99% then stop
#    if inode usage > 30000 then alert
#    if inode usage > 99% then stop
#    group server
#
#
## Check a file's timestamp. In this example, we test if a file is older 
## than 15 minutes and assume something is wrong if its not updated. Also,
## if the file size exceed a given limit, execute a script
#
#  check file database with path /data/mydatabase.db
#    if failed permission 700 then alert
#    if failed uid data then alert
#    if failed gid data then alert
#    if timestamp > 15 minutes then alert
#    if size > 100 MB then exec "/my/cleanup/script"
#
#
## Check directory permission, uid and gid.  An event is triggered if the 
## directory does not belong to the user with uid 0 and gid 0.  In addition, 
## the permissions have to match the octal description of 755 (see chmod(1)).
#
#  check directory bin with path /bin
#    if failed permission 755 then unmonitor
#    if failed uid 0 then unmonitor
#    if failed gid 0 then unmonitor
#
#
## Check a remote host network services availability using a ping test and 
## check response content from a web server. Up to three pings are sent and 
## connection to a port and a application level network check is performed.
#
#  check host myserver with address 192.168.1.1
#    if failed icmp type echo count 3 with timeout 3 seconds then alert
#    if failed port 3306 protocol mysql with timeout 15 seconds then alert
#    if failed url
#       http://user:password@www.foo.bar:8080/?querystring
#       and content == 'action="j_security_check"'
#       then alert
#
#
###############################################################################
## Includes
###############################################################################
##
## It is possible to include additional configuration parts from other files or
## directories.
#
#  include /etc/monit.d/*
#
#
3. Redaguojame monit failą /etc/default/monit aplanke:

Kodas:
nano monit
Įklijuokite šias reikšmes:

Kodas:
# You must set this variable to for monit to start
startup=1

# To change the intervals which monit should run uncomment
# and change this variable.
# CHECK_INTERVALS=180
4. Paleidžiame monit servisą:

Kodas:
service monit start
5. Galite peržiūrėti naršyklėje grafinę monit sistemos aplinką adresu:

Kodas:
serverioIP:8090
===================
Pastabos:

- Prieš įdiegiant stebėjimo sistemą įsitikinkite jog serveryje yra įdiegtos norimos stebėti aplikacijos
- Jei nepavyksta startuoti monit serviso, įsitikinkite jog visus konfiguracinius veiksmus atlikote teisingai (sintaksė, failų egzistavimas)
===================

Nuorodos:

 

Žymės
apache, backup, centos, ftp serveris, mail, monit, monit konfiguracija, mysql, mysql serveris, port 3306, postfix, root, serveris, slaptažodis, yum

Temos įrankiai Ieškoti šioje temoje
Ieškoti šioje temoje:

Detali paieška

Žinučių rašymo taisyklės
Jūs negalite kurti naujų temų
Jūs negalite rašyti žinučių
Jūs negalite įkelti failų
Jūs negalite redaguoti savo įrašų

BB kodas yra Įjungtas
Šypsenos yra Įjungtas
[IMG] kodas yra Įjungtas
HTML kodas yra Išjungtas

Greita navigacija

Panašios temos
Tema Temą sukūrė Forumas Atsakymai Paskutinė žinutė
CloudLinux operacinė sistema [KVM] iv_vytenisg Valdymo pultai 3 2019-08-01 21:08
Serverio stebėjimo programa Netdata iv_vytenisg Kitos aplikacijos 0 2018-05-10 17:01
Srauto stebėjimo programos iv_vytenisg Informaciniai straipsniai 0 2018-02-14 16:09
ownCloud sistema IV_VytautasB Valdymo pultai 0 2015-06-19 13:29
Munin sistemos stebėjimo įrankio diegimas Debian 6 aplinkoje IV_VygandasS Monitoringas 0 2013-07-19 09:14


Visi laikai yra GMT +3. Šiuo metu yra 05:56.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.